1 HP X 1.5" Bore Pump

Pump Specifications:

Power x Inlet	Phase	Voltage	Pressure	Head(m)
1HP X 1 1/2"	1 / 3	110/220	4 - 5Kg	30-35M

Pump Applications:

This pump suits the supply, boost and/or transfer of clean water free of impurities. Commonly used in:
- apartment, high rises and residences
- agricultural irrigation
- firefighting system
- drawing water from well
- industrial applications.

Requirements:

This pump is only able to handle the transfer of clean water (under 30 degree Celsius in temperature). Other types of liquid such as hot water, water with impurities (eg. sand), oil, acid or alkaline should be avoided.
Liquid temperature: +4 deg. Celsius ~ +30 deg. Celsius (If the liquid temperature exceeds 30 degree Celsius, forced cooling by using a compatible sleeving is required.)
The pump must be totally submerged under water during operation. Its motor is located at the bottom of the pump which means that the pump can be positioned vertically, horizontally or at any angles as required by the user.

Pump Construction:

This multistage centrifugal bore pump has its impeller fixed on the extending motor shaft which is connected to the motor with a coupling. All areas in contact with water are made of anti-rust material. A filter net is positioned at water entry to prevent particles from entering the pump.